English
German
Polish
Spanish2003 Oyster 49
€168,007* Poole, United Kingdom
Boat Details
| Make: | Oyster |
| Model: | 49 |
| Year: | 2003 |
| Condition: | Used |
| Length: | 49'0" (14.94m) |
| Fuel Type: | diesel |
| Hull Material: | Fiberglass |
| Price: | €168,007* |
| Tax Status: | Paid |
| Location: | Poole, United Kingdom |
| *This price has been converted from 149,500 GBP and is for indication only. | |
Measurements
| LOA: | 49'0" (14.94m) |
| Beam: | 14.5 feet |
| Displacement: | 45745 kilogram |
| Max Draft: | 7.25 feet |
Propulsion
| Engine Make: | Perkins |
| Engine Model: | 6354 |
| Engine Power: | 135.0hp |
| Fuel Type: | diesel |
| Cruising Speed: | 7 knots |
| Max Speed: | 9 knots |
Other Specifications
A very unique opportunity to own an Oyster 495. Cora Jean II is now available for viewings. She is one of the last 495 ever built and is currently at the stage for an interior to be fitted. She has been built to last with extra-thick hull and extra strength keel and hull bulkheads. A project opportunity for you to get stuck in to.
For more information or to arrange a viewing 7 days a week, please call Richard on 01202 916424 or email poole@clippermarine.co.uk
Extras
Stainless drinking water tank
Seagull drinking water filter complete with tap
Sinks
Dish Washer
Washing machine
Burmese teak purchased seperately for fitting of capping rail on hull deck interface
Stantion sockets
Battery cables with luggs fitted
6 x 280 AMP hour gel cells in stainless steel carrier frame
2 x Diesel start batteries
All bulkheads fitted with marine ply all water tight compartments
All deck and below waterline insulated with urea formaldehyde two inches thick and glassed over with 3x450 gram chopped strand mat. (No condensation)
Giant keel plates fitted by owner (stainless steel)
All chain plate beams fitted
Gen set relocated in dedicated own space complete with new fuel tank
Various pipes / wires / and fittings
Water maker primary and secondary filters and carriers
Plumbing for water system fitted with c/w accumulator tank
Eberspacer diesel heater CW pipes control exhaust and exhaust fittings rig model probably at least 7 KW
All duct lockers fitted in stern locker
Main sliding hatch from cockpit to interior top and front fitted
Deck hatches fitted
Hull windows new in boxes - only two
Fenders and Warps
Nuts / Bolts
Mixer taps for heads and galley
Some hoses for electro hydraulic bow thruster
Bow thruster unit fitted which is fully retractable in to hull. Twin screw design
There are lots of other parts and spares as new pumps etc
New Seldon spar never stepped all fitted with lights, tracks, runners etc
Mast ring and heal fitting fitted to bilge
All rigging screws hawse fittings
Backstay
Runner
Inner
Stemhead
Roller fittings
Most deck hatches
Steering binicle and instruments
Spray dodger and Stainless frame and full cockpit enclosure frame
Tankage
Fuel tanks - x 3
364L Aluminium fuel tank
500L GRP fuel tank Gen Set
500L GRP Saloon fuel tank
Water Tanks - x 2
364LStainless tanks
Grey Water - x 1
302L GRP grey water tank
Interested in this Oyster 49 for €168,007?*
Contact one of our brokers directly, or fill in the contact form below:
Disclaimer
*This price has been converted from 149,500 GBP and is for indication only.
Clipper Marine Spain offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
